Based on its accurate grasp of industry trends and its own technical advantages, Beidouxing Electronic Technology has identified the following key R&D directions for new intelligent switching power supplies in 2025:
Improving power conversion efficiency is the core of achieving energy conservation. In the 2025 R&D work, Beidouxing’s R&D team will focus on adopting advanced soft-switching technology and new power devices to significantly enhance the conversion efficiency of power supplies. Soft-switching technologies, such as Zero-Voltage Switching (ZVS) and Zero-Current Switching (ZCS), switch power devices when their voltage or current is zero. This effectively reduces switching losses, improves the efficiency of the overall power system, reduces Electromagnetic Interference (EMI), and lowers requirements for heat dissipation equipment. For example, integrating a full-bridge ZVS converter topology into the design—using a resonant circuit to turn on switching devices when the voltage is zero—can significantly reduce switching losses and improve power supply efficiency.
In terms of power devices, the team will explore the application of wide-bandgap semiconductor devices such as Silicon Carbide (SiC) and Gallium Nitride (GaN). Compared with traditional silicon-based devices, SiC and GaN devices have higher electron mobility, lower on-resistance, and higher breakdown voltage. They can operate at higher frequencies, effectively reducing the size of magnetic components and capacitors, increasing power density, and further improving power conversion efficiency. The goal is to increase the conversion efficiency of new intelligent switching power supplies to over 95% by the end of 2025, and even reach 98% under certain load conditions—achieving an industry-leading level and significantly reducing energy consumption for users.
Intelligence is a key development trend for new switching power supplies. In the 2025 R&D work, Beidouxing Electronic Technology will equip new intelligent switching power supplies with powerful intelligent control and communication functions. Through built-in high-performance microprocessors and intelligent sensors, the power supply can real-time monitor its own operating status—including parameters such as voltage, current, temperature, and power—and make intelligent adjustments based on these parameters to achieve precise control of the power supply. For example, when an excessively high temperature of the power supply is detected, it will automatically adjust the speed of the cooling fan or reduce the power supply’s output power to protect the safety of the power supply and connected equipment; when the load changes, it will intelligently adjust the output voltage and current to ensure the equipment always operates in the optimal state.
At the same time, the power supply will integrate multiple communication interfaces, such as Ethernet, RS485, WiFi, and Bluetooth, and support communication protocols including Modbus and MQTT. This facilitates data interaction and remote monitoring with various intelligent devices, industrial control systems, or cloud platforms. Users can remotely monitor the power supply, set parameters, and perform fault diagnosis anytime and anywhere via a mobile APP, computer client, or industrial cloud platform. For instance, in industrial automated production lines, managers can use the cloud platform to real-time check the operating status of power supplies for various devices, promptly identify and resolve potential issues, and improve production efficiency and the convenience of equipment maintenance. In smart home scenarios, users can remotely control the power switches of home appliances via a mobile APP and set scheduled tasks, realizing intelligent management of home appliances and enhancing the convenience and comfort of daily life.
In addition to energy efficiency and intelligence, user-friendliness is also a key focus of R&D for new intelligent switching power supplies. In product design, Beidouxing Electronic Technology will focus on optimizing the power supply’s size and installation method to make it easier to integrate into various devices. Adopting a modular design concept, the power supply will be divided into power modules, control modules, and interface modules. Customers can flexibly combine these modules according to their actual needs, shortening product development cycles and reducing costs. At the same time, the power supply’s operation process will be simplified: through an intuitive user interface and intelligent interactive design, users can easily master its operation and achieve convenient control. For example, a clear LED display or touch-sensitive control panel will be designed to real-time show the power supply’s operating status and key parameters; users can complete various function settings with simple button presses or touch operations.
Furthermore, in terms of product compatibility, the R&D team will ensure that the new intelligent switching power supply can seamlessly connect with mainstream electronic devices and control systems on the market, without the need for complex adaptation processes. This provides users with a one-stop, user-friendly power supply solution. Whether applied to automated equipment in the industrial sector or smart home products in the consumer electronics sector, this new power supply can be easily integrated to meet the diverse needs of different user groups.
To ensure the smooth progress of the new intelligent switching power supply R&D project, Beidouxing Electronic Technology has formulated a detailed R&D plan:
In this phase, the R&D team will conduct in-depth market research and technical analysis, collecting the latest technical trends, market demands, and information on competitive products related to new intelligent switching power supplies at home and abroad. Combining the company’s own technical advantages and market positioning, multiple feasible R&D schemes will be developed. Experts will be organized to demonstrate and evaluate these schemes, and the optimal R&D scheme will be finally determined. At the same time, preliminary research on key technologies will be carried out—such as circuit simulation of soft-switching technology and optimization of intelligent control algorithms—to lay the foundation for subsequent product design and development.
Based on the confirmed R&D scheme, the R&D team will concentrate on breaking through key technologies, including the design of high-efficiency energy-saving circuits, the development of intelligent control algorithms, and the integration of communication interfaces. On the basis of overcoming these key technologies, the circuit design of the new intelligent switching power supply will be carried out, completing tasks such as schematic design, PCB layout design, and component selection. Meanwhile, simulation analysis and optimization of the circuit design will be conducted: using advanced circuit simulation software to simulate the power supply’s operation under different working conditions, identifying and resolving potential issues in advance to ensure the circuit performance meets design requirements.
After the circuit design is completed, the project will enter the prototype production phase. The R&D team will produce the first batch of product prototypes in accordance with design requirements, and conduct comprehensive performance testing on the prototypes—including electrical performance testing, reliability testing, EMC testing, and environmental adaptability testing. Electrical performance testing will focus on verifying indicators such as the power supply’s conversion efficiency, output voltage accuracy, and load regulation rate. Reliability testing will simulate working conditions such as long-term operation and frequent power-on/off cycles to verify the power supply’s stability and service life. EMC testing will ensure the power supply complies with electromagnetic compatibility standards, does not interfere with surrounding equipment, and has strong anti-interference capabilities. Environmental adaptability testing will place the prototypes in harsh environments (such as high temperature, low temperature, high humidity, vibration, and shock) to test changes in their performance, ensuring the product can work reliably in various complex environments. Based on the test results, the prototypes will be optimized and improved to resolve issues identified during testing, ensuring the prototype performance meets expected goals.
After the prototype performance becomes stable, small-batch trial production will be carried out to verify the product’s production process and quality stability. At the same time, the trial-produced products will be launched into the market for customer trials and market verification, and customer feedback will be collected. Cooperative relationships will be established with key customers in the industry to apply the new intelligent switching power supplies to practical projects—such as industrial automated production lines and smart home systems—verifying the product’s performance and user experience through real operating scenarios. Based on customer feedback, the product will be further optimized and improved to fully prepare for large-scale production and market promotion.
Through R&D work throughout 2025, Beidouxing Electronic Technology is expected to achieve the following outcomes:
- Successfully develop a new intelligent switching power supply product featuring high energy efficiency, intelligent control and communication, and strong user-friendliness;
- Ensure the product’s performance indicators reach industry-leading levels: conversion efficiency of over 95%, intelligent control accuracy within ±1%, multiple user-friendly operation methods, and good compatibility;
- Obtain multiple intellectual property rights related to the new power supply (such as patents and software copyrights), further enhancing the company’s technical competitiveness in the intelligent switching power supply field;
- Lay a solid foundation for large-scale production and market promotion of the product through small-batch trial production and market verification. It is expected that large-scale sales of the new product will be realized in 2026, bringing new economic growth points to the company and contributing to promoting technological progress and product upgrading in the switching power supply industry.
The successful R&D of the new intelligent switching power supply will bring broad market prospects and far-reaching strategic significance to Beidouxing Electronic Technology.
In terms of the market, as the demand for energy conservation and intelligence grows across industries, the new power supply product will be widely used in numerous fields—including industrial automation, data centers, new energy vehicle charging equipment, smart homes, and medical devices. Relying on its outstanding energy-saving performance and intelligent advantages, Beidouxing’s new intelligent switching power supply will be able to meet the diverse power supply needs of different customer groups. It will further consolidate and expand the company’s market share in the domestic market, while actively exploring the international market to enhance the company’s international reputation and brand influence.
From a strategic perspective, the R&D of the new intelligent switching power supply is a key measure for Beidouxing Electronic Technology to achieve sustainable development. By continuously launching innovative products, the company can maintain a leading position in the fierce market competition and enhance its core competitiveness. At the same time, this will help the company further improve its product system, expand its business scope, and realize diversified development. In addition, the technical experience accumulated and professional talents cultivated during the R&D process will provide strong support for the company’s future R&D of other new products, promoting the company’s continuous innovative development and gradually growing into a world-leading provider of power supply solutions.
In conclusion, 2025 will be a crucial year for Dongguan Beidouxing Electronic Technology Co., Ltd. to make every effort in the R&D of new intelligent switching power supplies. The company will give full play to its technical advantages, team advantages, and innovative spirit, forge ahead on the path of new power supply R&D, bring higher-quality and more advanced products and solutions to the industry, and contribute to promoting energy conservation and intelligent development. Let us jointly look forward to Beidouxing Electronic Technology achieving fruitful results in the 2025 new intelligent switching power supply R&D project and opening a new chapter in the company’s development.
Mail：mkt11@bdxelec.com
Telephone：+86-769-81898201
Contact address：Changping Town, Dongguan City, Guangdong Province
